|
ONLY PROFESSIONALS understand how
plant material will respond to specific treatments. Timing depends on
species and the desired result. Most routine pruning can be performed at
any time of the year.
Crown Cleaning:
The removal of dead, dying, diseased, crowded, weakly attached, low
vigor branches, and water sprouts from the tree canopy, shrub or hedge.
Crown Cleaning and Thinning are the most popular APM maintenance
procedures.
Crown Elevating:
Removes the lowermost branches of a tree in order to provide
clearance for pedestrians, buildings, vehicles or vistas.
Crown Thinning and Restoration:
The selective removal of branches to increase light and air
penetration/circulation throughout the canopy, or to lessen wind
resistance and damage potential from storms. Thinning opens the foliage
of a tree, reduces weight on heavy limbs, distributes ensuing
invigoration throughout a tree and helps restore the tree’s natural
shape.
Crown Reduction:
Thins or heads back branches to reduce tree height and/or spread of
the tree canopy by pruning back leaders to lateral branches. In most
trees (exceptions being most apples and some crabapples), this procedure
is only done as a last resort instead of complete removal.
Reshaping or Shearing:
For hedges or evergreens where a formal, neat compact appearance is
required. Should be started early in the life of a tree or hedge and
repeated at least once per season for hedges and every two to three
years for evergreens, for best results.
Tree Removal
(Cutting to Grade):
Means to cut a tree or shrub as close to the ground as possible.
Structural Pruning:
Recommended to improve appearance, maintain space between other
trees, buildings or power-lines.
Stump
Grinding:
Our machines reduce stumps to woodchips to a maximum depth of
12" (30 cm) below grade. Large, surrounding roots close to the
surface can also be cut, roots smaller than 4 - 5" (10 cm) must be
removed using other means. Stump chips are usually left in place in a
neat pile for later use as mulch, or can be placed under trees and
shrubs directly, if requested.
When pruning trees, these are the only
cuts that should be made:
|
|
Eliminating branches that rub against each
other
|
|
|
Removing limbs that interfere with wires
|
|
|
Removing dead or weak limbs that pose a
hazard or may lead to decay
|
|
|
Removing diseased or insect infested limbs
|
|
|
Creating better structure to lessen wind
resistance and reduce the potential for storm damage
|
|
|
Training young trees
|
|
|
Removing limbs damaged by adverse weather
conditions
|
|
|
Thinning or removal of unnecessary branches
|
|
|
Improving the shape or silhouette of the
trees
|
|
|
No branch should be removed without a reason
|
|